Home > News > Industry News >
Precautions for using high-temperature resistant control and shielded cables
High-temperature resistant control shielded cables are generally rope-like cables formed by several sets or several wires (each set has at least two wires). Each set of wires is insulated from each other and is usually wound around a central core. Insulation covers. Many antennas are erected in the air or installed underground or underwater for telecommunications or power transmission. High-temperature resistant control shielded cables can be divided into control cables, communication cables, and power cables according to their purposes. Electrical accidents often occur, so safety precautions should be taken when using them. Here are some protective measures for the use of high-temperature resistant control shielded cables.
Safety requirements for high-temperature resistant control and shielded cables
When cable lines cross each other, the high-voltage cable should be positioned below the low-voltage cable. If one of the cables passes through a pipeline protection device or is separated by a partition within 1 meter before and after the crossing point, the minimum allowable distance is 0.25 meters.
Safety precautions when using high-temperature resistant control shielded cables
When cables are close to or pass through thermal pipelines, if insulation measures are taken, the minimum distances between parallel lines and crossed lines should be 0.5m and 0.25m respectively.
When cables cross railways or highways, they should be protected by pipes, and the protective pipes should extend beyond the track or road surface by more than 2 meters.
3. The distance between the cable and the building foundation should ensure that the cable is buried beyond the scattered water of the building; when introducing the cable into the building, protective pipe fittings should be worn, and the protective pipe should also extend beyond the building's apron.
4. The distance between the cable directly buried underground and the ground of the general grounding device should be 0.25 to 0.5 meters; the buried depth of the cable directly buried underground should not be less than 0.7 meters, and it should be buried below the permafrost layer.


